Effect of TiC, TiN, and TiCN on Microstructural, Mechanical and Tribological Properties of PM Steels
Abstract
Developments in sintering of powder mixtures contributed growth of steel production via powder metallurgy. This study aims to improve the mechanical and tribological properties of carbon steels produced via powder metallurgy. For this purpose, P/M carbon steel was alloyed with 3 % Manganese. Then, this alloyed steel was reinforced with particles such as titanium carbide (TiC), titanium nitride (TiN) and titanium carbonitride (TiCN) in different proportions (0.5 and 1 %) and combinations. The effect of these additives on the mechanical properties of PM steels was determined by conducting tensile and hardness tests. Wear tests were performed to understand the tribological properties of samples. Also, microstructural properties, fracture surfaces, and worn surfaces of samples were examined using a Scanning Electron Microscope. Results show that the hardness and tensile strength of carbon steel increased by nearly 158 % and 62 % respectively, while the wear resistance improved by 4 times with the addition of 3 % Mn and 0.5 % TiCN.
Copyright
Authors retain copyright of the published article and have the right to use the article in the ways permitted to third parties under the Creative Commons Attribution 4.0 International license. Full bibliographic information (authors, article title, journal title, volume, issue, pages) about the original publication must be provided and a link must be made to the article's DOI. This license allows to copy and redistribute the material in any medium or format, remix, transform, and build upon it for any purpose, even commercially, as long as appropriate credit is given to the original author(s), a link to the license is provided and it is indicated if changes were made.