Sintering Studies on Iron-Carbon-Copper Compacts

Authors

  • Philomen-D-Anand Raj Perianayagam Department of Mechanical Engineering, Jawaharlal Nehru Technological University
  • Palaniradja Kichenaradjao Department of Mechanical Engineering, Pondicherry Engineering College
  • Gopala Krishna Alluru Department of Mechanical Engineering, Jawaharlal Nehru Technological University

Abstract

Sintered Iron-Carbon-Copper parts are among the most widely used powder metallurgy product in automobile. In this paper, studies have been carried out to find out the sintering characteristics of iron-carbon-copper compacts when sintered in nitrogen atmosphere. The effects of various processing parameters on the sintering characteristics were studied. The various processing parameters considered were compaction pressure, green density and sintering temperature. The sintering characteristics determined were sintered density, porosity, dimensional change, micro hardness and radial crush strength. The results obtained have been discussed on the basis of micro structural observations. The characteristics of SEM fractography were also used to determine the mechanism of fracture. The fracture energy is strongly dependent on density of the compact.

Downloads

Published

2017-12-13

Issue

Vol. 48 No. 2 (2016)

Section

Articles

License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors retain copyright of the published papers and grant to the publisher the right to publish the article, to be cited as its original publisher in case of reuse, and to distribute it in all forms and media. Articles will be distributed under the Creative Commons Attribution International License (CC BY 4.0).